The IDG-8711P is a medium-range RFID reader that reads a card at up to 100 cm, so a driver need not wind down the window or reach out to a post. It sends Wiegand 26 to the controller, the format almost every access system accepts, so it drops into an existing installation. It runs on DC 12V and measures 230 × 230 × 35 mm, a slightly smaller panel than the 8710P for tighter mounting positions.
The IDG-8711P runs on DC12V. Confirm your existing supply matches before installation.
The IDG-8711P measures 230*230*35mm. Confirm clearance at the mounting point before ordering.
The reading range is listed in the specification above. Anything beyond it will not read reliably, so mount the IDG-8711P where users can present a card within that distance.
Tell us what you already have fitted — the lock, drop bolt, turnstile or gate controller — and we will confirm the wiring approach for the IDG-8711P before you buy.
Yes. Ranger works through 22,000 authorised dealers across the region, so installation can be arranged wherever you are in Malaysia and Singapore, with exports to Indonesia. Send an enquiry from this page with your site details and we will route it to the nearest installer.